RoHS CompliantAll Small Tree cards, switches and storage products are RoHS compliant!




  Home > Shared Storage Info > Gigabit Cards Info >

  Intel based GbE PCI-Express Six Port Copper Gigabit Ethernet Server Adapter PEG6
Six Port Copper PCI-Express Gigabit Ethernet Server Adapter
 
This product has been replaced by the PE2G6I. To purchase or for more information
please click here.

This product has been replaced by the PE2G6I. To purchase or for more information
please click here.

The Small Tree PEG6 server card allows you to expand the network connectivity of your Intel Mac systems. The PEG6 card provides the ability to significantly increase your network bandwidth of your system, enabling you to support larger projects effortlessly. The PEG6 card supports jumbo frames, flow control and VLAN features which provide further improvements in performance with low CPU utilization. The PEG6 Gigabit Ethernet ports support Mac OS X's built-in link aggregation software in combination with the internal Gigabit Ethernet ports of the system. The PEG6 will transparently load balance among all linked ports, and seamlessly fail over if one or more ports or cables become disabled. Must be using OS X 10.6.8 or later.





Product Features:
  Features   Benefits
  Supports Apple Power Mac G5, Mac Pro and Intel Xserve systems.   Enables expansive solutions across these Mac platforms.
  Three Intel® 82571GB Gigabit Controllers   Enables four Gigabit Ethernet connections on a single adapter, delivering increased bandwidth for slot-constrained servers and providing high performance, reliability, and low power use in two single, integrated, dual port PCI Express Gigabit
Ethernet controller chips.
  Interrupt moderation   Delivers increased performance while significantly reducing CPU utilization.

Compatible with x8, and x16 full-height PCI Express slots

Allows quad-port operation in almost any PCI Express server slot, except x1 and x4 slots, and allows each port to operate without
interfering with the other.
  Category-5 unshielded twisted pair (UTP) 4-pair cabling
  Uses pre-existing 4-pair cabling and saves re-wiring cost.
  RoHS compliant, lead-free technology   Allows lower power consumption,remote wake and remote booting.

Technical Specifications



System Requirements

Apple Power Mac G5, Mac Pro and Intel Xserve running OS 10.4.11 or later

Connectors
Six RJ-45

Wiring

Category-5, unshielded twisted pair (UTP), 4-pair

IEEE Standard/Network Topology

10BASE-T,100BASE-TX,1000BASE-T

Intel® Lead-free Technology 

Yes

Auto-negotiation Full-duplex Capable

Yes

Integrated media access control (MAC) and physical layer (PHY)


Yes

Includes a full-height bracket (does not include a low-profile bracket)

Yes

RoHS

Yes

Cable distance
100 m in Category-5 for 100/1000 Mbps and Category-3 for 10 Mbps

Advanced configuration and power interface (ACPI) 1.0 power management


Yes

Wake on LAN support over PCI Express PXE 2.0 enabled through boot read-only memory (ROM)


Yes

Adapter fault tolerance (AFT)

Yes

Switch fault tolerance (SFT)

Yes

Adaptive load balancing (ALB)
Yes

Fast Ether Channel (FEC)

Yes

Gigabit EtherChannel (GEC)

Yes

Teaming support
Scales up to 8 connections

Multiple teams
Supports 6 separate teams, maximum

IEEE 802.3ad (link aggregation control protocol)

Yes

PCIe Hot Plug/Active peripheral component interconnect (PCI)

Yes

IEEE 802.1Q VLANs

Yes

IEEE 802.3 (z, ab, u, x) flow control support

Yes

TCP checksum offload - transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)

Yes

IEEE 802.1p

Yes

TCP segmentation/large send offload

Yes

Interrupt moderation

Yes

Data rate(s) supported per port

10, 100, and 1000 Mbps

Bus type

PCI Express 1.0a

Bus width

x8 lane PCI Express, operable in x8, x16 slots

Bus speed (x4, encoded rate)

10 Gbps uni-directional; 20 Gbps bi-directional

EEPROM-SPI and single EEPROM support

Yes

Interrupt levels

INTA

IEEE support

802.3ab

Hardware certifications

FCC B, UL, CE, VCCI, BSMI, CTICK, MIC

Controller-processor

Intel® 82571GB

Typical power consumption

12.096 W (12 V @ 1.008 A)

Operating temperature

0–55° C

LEDs

6 (1/port, link and speed) solid
and blinking

Physical Dimensions



Length

16.32 cm (6.425 in)

Width

11.12 cm (4.376 in)

Height of end bracket

12.09 cm (4.76 in)



Share your knowledge of this product with other customers... Be the first to write a review
(Your shopping cart is empty)