Home > Products > Gigabit Cards > Expresscard34 Gigabit Cards >

  Expresscard34 GbE Single Port Copper Gigabit Ethernet Laptop Adapter PEG34m
  Single Port Copper Expresscard34 Gigabit Ethernet Adapter
 
To purchase this product, please visit one of our partners:
The PEG34m is a 10/100/1000M Ethernet ExpressCard, which is specifically designed to plug into a MacBook Pro (or other Windows desktop or laptop) equipped with an ExpressCard 34mm slot. The PEG34m provides throughput and connectivity at gigabit speeds up to 1000 Mbps (1Gbps) raw bandwidth, that is 100 times faster than the original Ethernet, yet is compatible with existing Ethernets. It works in conjunction with the built-in Gigabit Ethernet port and supports 802.3ad link aggregation and Jumbo frames up to 9000MTU.

Some practical reasons to buy the PEG34m ExpressCard are:

  • you need to have a second fully functional Gigabit network for your laptop for file transfer/sharing mechanisms (e.g. iSCSI or ATA over Ethernet) that supports Jumbo frames
  • you need to have a backup in case your built-in port goes dead there are situations where you need a separate laptop-to-laptop connection for demos and don't have switch ports available
  • you need to have your physical Ethernet cable connection plugged into the left hand side of your MacBook Pro
  • you want to use link aggregation on your MacBook Pro it is an inexpensive investment for the above benefits!

With the innovative design of the foldable connector, the PEG34m comes with an ultra slim RJ-45 port that is only half the height of regular RJ-45 connectors, making it the thinnest ExpressCard on the market to date. It's easy and convenient to carry in your pocket, or simply to store away when not in use. The PEG34m enables you to connect your MacBook Pro via an available ExpressCard slot and your Ethernet and Gigabit network in seconds, you are networked in no time. The PEG34m also features low power-consuming device which draws power from the ExpressCard slot directly, thus no external power supply is required.

Read the Macsimumnews review of the PEG34m card!



Product Features:
  • Compliant with ExpressCard standard
  • Easy to read LED indicators
  • Express interface with 2.5 GHz signaling
  • Automatic MDI/MDIX crossover at all speed
  • Active state power management (L0s) support
  • Compact and robust design perfect solution for all network users, both desktop and mobile
  • 10/100/1000M data rate auto-negotiation
  • Microsoft Plug-and-Play compatible
  • 10/100/1000M IEEE 802.3 compliant
  • Wake On LAN (WOL) power management support
  • Feature full duplex mode that doubles the network connection speed
  • Easy Installation
  • Foldable connector for convenient carrying and storage
  • Serial Peripheral Interface (SPI) for remote boot (PXE 2.1) with Windows
  • High-power Bus-power  -  no outside power is required




Technical Specs:

SPECIFICATIONS
 
Network Specification IEEE802.3, 802.3u and 802.3x
IEEE802.3ab and 802.3z
Cat3/Cat5 UTP/STP cable up to 328ft/100M
Host Interface  High-power ExpressCard Socket powered from MacBook Pro (or PC system), no external power needed
Suspend power saving mode supported
LED Indicators  Link Active Status: 
1Gbps: Blue
100 Mbps: Green
10Mbps: Yellow
Dimensions 34mm(W) * 108mm(D) * 5 mm (H)
EMC Certification FCC Part 15B in US, CE EN55022/EN55024
Supported Operating Systems Mac OS 10.4.11 or later
Windows98/2000/ME/XP




 Share your knowledge of this product with other customers... Be the first to write a review.
(Your shopping cart is empty)