Home > Gigabit Switches >   24-port Gigabit Ethernet switch w/4 SFP ports, can be upgraded w/ POE & 2 10GbE ports
	FGS624P $3,995.00 Product Code: FGS624P

Description Technical Specs Datasheets   The Foundry GS Series switches are managed switches. They support jumbo frames, 802.3ad link aggregation, VLANs, optical connections, Power over Ethernet (for IP phones) and 10Gb upgrades. They also come standard with redundant power and have an MTBF well over 200,000 hours (much much higher than what you'll find in Netgear, Dlink or other cheap switches).   Product Features Compact 24-port and 48-port 10/100/1000 Mbps base models upgradeable with power over Ethernet (PoE) and 2 ports of 10-Gigabit Ethernet Support for 48 10/100/1000 Class 3 IEEE 802.3af Power over Ethernet (PoE) ports�industry�s highest capacity in a compact switch Support for jumbo frames (16K) and 802.3ad link aggregation Ideal for VoIP and wireless LAN deployments Support for leading VoIP equipment with automatic voice VLAN and QoS configuration Option for modular and field-upgradeable 2-port 10-Gigabit Ethernet XFP module for high-performance networking IronShield 360 security protects network access and integrity;features include closed loop threat detection and mitigation,802.1x with multi-device authentication,dynamic VLAN assignment,extended ACLs,MAC filters Port mirroring and sFlow traffic sampling can be configured together to provide system-wide traffic monitoring for traffic accounting, intrusion detection,802.1x identity monitoring,capacity planning and fault isolation Overview The FastIron GS Series line of compact switches is a new generation of power over Ethernet (PoE) switches designed for cost-effective network convergence and high-performance networking.This product family is designed for organizations looking for the convenience and scaling benefits of a stackable switch with the option to expand to 10-Gigabit Ethernet on a compact and convergence-ready platform. Featuring modular upgradeability for Power over Ethernet, 10-Gigabit Ethernet and redundant power in a 1.5U high form,the FastIron GS Series provides enterprise organizations with a flexible and cost-effective solution for high-performance convergence at the network edge. The FastIron GS Series is available in two PoE models and two non-PoE models.The two PoE models are the FastIron GS 624P-POE and FastIron GS 648P-POE. These switches support 24 and 48 10/100/1000 Mbps PoE ports,respectively.  The FastIron GS 624P and FastIron GS 648P support 24 and 48 10/100/1000 Mbps ports,respectively.The two non-PoE switches are field-upgradeable to support PoE providing a flexible solution for customers that want to upgrade to PoE after deployment. The trend towards network convergence is driving the need for high availability solutions.The FastIron GS Series features 1+1 power redundancy using hot-swappable and field replaceable power modules that install into the rear of the unit. The power supplies are load sharing supplies which provide full 1+1 redundancy for as many as 48 Class 1 and Class 2 PoE ports and 31 Class 3 (15.4 watts) ports. For the 24-port FastIron GS 624P-POE model,the system can support true 1+1 redundancy for 24 Class 1,Class 2 or Class 3 PoE ports.The 48-port FastIron GS 648-POE supports up to 48 10/100/1000 Class 3 (15.4 watts) PoE ports with two power supplies�the highest Class 3 PoE port density in the industry for a compact switch. The FastIron GS Series includes PoE upgradeable models � the FastIron GS 624P and the FastIron GS 648P. Both models are ideal for network installations that do not have an immediate need for PoE,but will benefit from the investment protection provided by the upgradeability option.Additionally, FastIron GS Series switches are field upgradeable to include a 2-port 10-Gigabit Ethernet (10-GbE) module with small form factor pluggable XFP transceivers. Supported transceivers include SR,LR,ER,ZR,and ZRD optics supporting fiber lengths up to 80Km. Offering network managers the flexibility to upgrade to 10-GbE helps to future-proof the network provides added investment protection. To meet existing and emerging network requirements,the FastIron GS Series includes advanced Layer 2 features and protocols including Foundry�s Metro Ring Protocol and Virtual Switch Redundancy Protocol supporting resilient layer 2 topologies.In addition,the FastIron GS Series supports advanced quality of service (QoS) controls including prioritization,classifying,and marking of Ethernet and IP traffic.Network managers can configure the switches to prioritize and re-mark VoIP traffic using 802.1p priority and IP Type of Service and DiffServ Codepoints (TOS/DSCP). Lastly, the FastIron GS simplifies VoIP deployments with dynamic voice VLAN assignment,which dynamically assigns voice traffic to a operator specified VLAN. The FastIron GS Series features advanced bandwidth management and IronShield security capabilities including ingress and egress rate limiting,denial of service protection, IEEE 802.1x with multi-device authentication and dynamic VLAN assignment,MAC filters,standard and extended access control lists,port mirroring and embedded sFlow packet sampling.The embedded sFlow provides system- wide traffic monitoring that can be used for accounting, troubleshooting and intrusion detection.Using Foundry�s IronView Network Management (INM) System to process sFlow data from the FastIron GS switches,IronShield 360 provides a closed loop threat detection and response solution. sFlow packet samples are scanned for known threat signatures. Upon a positive match,INM can be configured to automatically send a control command to the FastIron GS switch to throttle or disable the port on which the threat has been detected. This advanced security capability provides a network-wide security umbrella without the added complexity and cost of ancillary sensors

Related Products Edge-corE 24 Port 10/100/1000 Web Smart Switch ES4324 $396.96 DOES NOT SUPPORT DYNAMIC LINK AGGREGATION Add Foundry 48-port L3 Gigabit Stackable Switch FGS648P $5,995.00 Add XFP 10Gb Copper CX4 module XFP-CX4 $495.00 Add 10Gb Stacking Cable (Large 130cm) Our Price: $142.00 Add 10 Gb Optional Uplink module EM4625-XG-XENPAK $1,284.00 Add

 Share your knowledge of this product with other customers... Be the first to write a review.