Allows you to connect your Mac Pro or Intel Xserve systems to 10 Gigabit Ethernet capable switches and storage devices. The PETG2SFP+card will provide an immediate performance increase on large transfers, especially when using jumbo frames.

	Technical Specifications
	System Requirements		Mac Pro, Intel-based Xserve running Mac OS X 10.6.8 or later.
	Connectors		2 SFP+ Optical SR module connectors
	Cabling		850nm Optical Cable
	Max Cable Distance		300m
	Network Topology		10000BASE-SR, 1000 BASE-SR
	IEEE Support		802.3ab
	Controller–Processor		Intel® 82599
	Jumbo Frame Support		Up to 15.5 kB
	Data rate supported per port		1000 Mb/s, 10 Gb/s
	Bus type		PCI Express 2.0 (2.5 GT/s)
	Bus width		x8, x4, x2, x1
	Bus speed		2.5 Gbps uni-directional; 5 Gbps bi-directional, per PCIe Lane
	Interrupt levels		INTA
	Hardware certifications		FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
	Typical power consumption		3.3 W (3.3 V @ 1 A)
	Operating temperature		0° C to 70° C
	Storage temperature		-40° C to 70° C
	Storage humidity		90% non-condensing relative humidity at 35° C
	LED Indicators		LINK (solid) and ACTIVITY (blinking)
	Operating System		Mac OS X, Linux, Windows
	Physical Dimensions
	Length (1 and 2 port cards)		16.74 cm (6.59 in)
	Width		6.89 cm (2.71 in)
	Height of end bracket		PCI Express standard is 12 cm (4.725 in). PCI Express low-profile is 7.92 cm (3.12 in).