Allows you to connect your Mac Pro or Intel Xserve systems to 10 Gigabit Ethernet capable switches and storage devices. The PETG4NDA card will provide an immediate performance increase on large transfers, especially when using jumbo frames.

	Technical Specifications
	System Requirements		Mac Pro, Intel-based Xserve running Mac OS 10.5.8 or later.
	Connectors		4 DA module connectors which can accept SFP+ modules
	Cabling		Twinaxial copper cabling
	Max Cable Distance		10GBASE-SR (optical): 300m 10GBASE-T (copper RJ-45): 100m 10GBASE-T (twinaxial): 5m
	Network Topology		Dual Axial, SR, or LR optical
	IEEE Support		802.3ab
	Controller–Processor		Intel® 82599
	Jumbo Frame Support		Up to 15.5 kB
	Data rate supported per port		10 Gb/s
	Bus type		PCI Express 2.0 (2.5 GT/s)
	Bus width		x1, x2, x4, x8, x16
	Bus speed		2.5 Gbps uni-directional; 5 Gbps bi-directional, per PCIe Lane
	Interrupt levels		INTA
	Hardware certifications		FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
	Typical power consumption		25W
	Operating temperature		0° C to 55° C with 200 LFM airflow
	Storage temperature		-40° C to 70° C
	Storage humidity		0 to 85% non-condensing
	LED Indicators		LINK (solid) and ACTIVITY (blinking)
	Operating System		Mac OS X, Linux, Windows
	Physical Dimensions
	Length		6.60 in
	Width		4.33 in
	Height of end bracket		PCI Express standard is 12 cm (4.725 in)